Fabrication of silver nanoparticles decorated on sodium alginate microbeads enriched with keratin and investigation of its catalytic and antioxidant activity.

In this study, an environmentally friendly, effective, easily synthesizable and recoverable nano-sized catalyst system (Ag@NaAlg-keratin) was designed by decorating Ag nanoparticles on microbeads containing sodium alginate (NaAlg) and keratin obtained from goose feathers. The structure, morphology and crystallinity of the Ag@NaAlg-keratin nanocatalyst were evaluated by XRD, FT-IR, FE-SEM, EDS/EDS mapping and TEM analyses. Catalytic ability of designed Ag@NaAlg-keratin nanocatalyst was then investigated against 4-nitrophenol (4-NP) and methyl orange (MO) reductions. Ag@NaAlg-keratin nanocatalyst effectively reduced 4-NP in 6 min and MO in 5 min, with rate constants of 0.17 min-1 and 0.16 min-1, respectively. Additionally, activation energies (Ea) were found as 39.8 kJ/mol for 4-NP and 37.9 kJ/mol for MO. Performed recyclability tests showed that the Ag@NaAlg-keratin nanocatalyst was easily recovered due to its microbead form and successfully reused five times, maintaining both its activity and structure. Furthermore, antioxidant activity of Ag@NaAlg-keratin nanocatalyst was the highest (73.16 %).

The effects of keratin-coated titanium on osteoblast function and bone regeneration.

Wool derived keratin, due to its demonstrated ability to promote bone formation, has been suggested as a potential bioactive material for implant surfaces. The aim of this study was to assess the effects of keratin-coated titanium on osteoblast functionin vitroand bone healingin vivo. Keratin-coated titanium surfaces were fabricated via solvent casting and molecular grafting. The effect of these surfaces on the attachment, osteogenic gene, and osteogenic protein expression of MG-63 osteoblast-like cells were quantifiedin vitro. The effect of these keratin-modified surfaces on bone healing over three weeks using an intraosseous calvaria defect was assessed in rodents. Keratin coating did not affect MG-63 proliferation or viability, but enhanced osteopontin, osteocalcin and bone morphogenetic expressionin vitro. Histological analysis of recovered calvaria specimens showed osseous defects covered with keratin-coated titanium had a higher percentage of new bone area two weeks after implantation compared to that in defects covered with titanium alone. The keratin-coated surfaces were biocompatible and stimulated osteogenic expression in adherent MG-63 osteoblasts. Furthermore, a pilot preclinical study in rodents suggested keratin may stimulate earlier intraosseous calvaria bone healing.

Unraveling UVB effects: Catalase activity and molecular alterations in the stratum corneum.

AIM: Ultraviolet B (UVB) radiation can compromise the functionality of the skin barrier through various mechanisms. We hypothesize that UVB induce photochemical alterations in the components of the outermost layer of the skin, known as the stratum corneum (SC), and modulate its antioxidative defense mechanisms. Catalase is a well-known antioxidative enzyme found in the SC where it acts to scavenge reactive oxygen species. However, a detailed characterization of acute UVB exposure on the activity of native catalase in the SC is lacking. Moreover, the effects of UVB irradiation on the molecular dynamics and organization of the SC keratin and lipid components remain unclear. Thus, the aim of this work is to characterize consequences of UVB exposure on the structural and antioxidative properties of catalase, as well as on the molecular and global properties of the SC matrix surrounding the enzyme. EXPERIMENTS: The effect of UVB irradiation on the catalase function is investigated by chronoamperometry with a skin covered oxygen electrode, which probes the activity of native catalase in the SC matrix. Circular dichroism is used to explore changes of the catalase secondary structure, and gel electrophoresis is used to detect fragmentation of the enzyme following the UVB exposure. UVB induced alterations of the SC molecular dynamics and structural features of the SC barrier, as well as its water sorption behavior, are investigated by a complementary set of techniques, including natural abundance 13C polarization transfer solid-state NMR, wide-angle X-ray diffraction, Fourier transform infrared (FTIR) spectroscopy, and dynamic vapor sorption microbalance. FINDINGS: The findings show that UVB exposure impairs the antioxidative function of catalase by deactivating both native catalase in the SC matrix and lyophilized catalase. However, UVB radiation does not alter the secondary structure of the catalase nor induce any observable enzyme fragmentation, which otherwise could explain deactivation of its function. NMR measurements on SC samples show a subtle increase in the molecular mobility of the terminal segments of the SC lipids, accompanied by a decrease in the mobility of lipid chain trans-gauche conformers after high doses of UVB exposure. At the same time, the NMR data suggest increased rigidity of the polypeptide backbone of the keratin filaments, while the molecular mobility of amino acid residues in random coil domains of keratin remain unaffected by UVB irradiation. The FTIR data show a consistent decrease in absorbance associated with lipid bond vibrations, relative to the main protein bands. Collectively, the NMR and FTIR data suggest a small modification in the composition of fluid and solid phases of the SC lipid and protein components after UVB exposure, unrelated to the hydration capacity of the SC tissue. To conclude, UVB deactivation of catalase is anticipated to elevate oxidative stress of the SC, which, when coupled with subtle changes in the molecular characteristics of the SC, may compromise the overall skin health and elevate the likelihood of developing skin disorders.

Keratin-based bioplastics extracted from chicken feathers: Effect of chitosan concentration on the structural, chemical bonding, and mechanical properties of bioplastics.

Keratin was synthesized by alkaline hydrolysis from chicken feathers and then continue by casting method for producing bioplastics with additional various amounts of chitosan as a filler, polyvinyl alcohol (PVA) and glycerol as a plasticizer. The main purpose is analysis the effect of chitosan on the structural properties using quantitative analysis of X-ray diffraction (XRD) spectra, chemical bonding by Fourier transforms infrared (FTIR) spectra, and mechanical properties by texture analyser to the keratin-based bioplastics. Biodegradation of bioplastics was analysed from the loss of weight by burying in the soil. It's found that, the additional of chitosan (0 %, 2 %, 5 %, and 8 %) increased the crystallinity of bioplastics by 11.83 %, 11.12 %, 18.99 %, and 17.03 %, respectively, but decreasing tensile strength and elasticity of bioplastics. Degradation of bioplastic keratin-based shows that the addition of chitosan can reduce the degradation time which is directly proportional to the loss of CO bonds. The highest degradation rate is 89.29 % in 49 days for keratin-based bioplastics with 8 % chitosan, indicated that high potential for future production.

Keratin-containing scaffolds for tissue engineering applications: a review.

In tissue engineering and regenerative medicine applications, the utilization of bioactive materials has become a routine tool. The goal of tissue engineering is to create new organs and tissues by combining cell biology, materials science, reactor engineering, and clinical research. As part of the growth pattern for primary cells in an organ, backing material is frequently used as a supporting material. A porous three-dimensional (3D) scaffold can provide cells with optimal conditions for proliferating, migrating, differentiating, and functioning as a framework. Optimizing the scaffolds' structure and altering their surface may improve cell adhesion and proliferation. A keratin-based biomaterials platform has been developed as a result of discoveries made over the past century in the extraction, purification, and characterization of keratin proteins from hair and wool fibers. Biocompatibility, biodegradability, intrinsic biological activity, and cellular binding motifs make keratin an attractive biomaterial for tissue engineering scaffolds. Scaffolds for tissue engineering have been developed from extracted keratin proteins because of their capacity to self-assemble and polymerize into intricate 3D structures. In this review article, applications of keratin-based scaffolds in different tissues including bone, skin, nerve, and vascular are explained based on common methods of fabrication such as electrospinning, freeze-drying process, and sponge replication method.

Green syntheses of silk fibroin/wool keratin-protected AuAg nanoclusters with enhanced fluorescence for multicolor and patterned anti-counterfeiting.

Counterfeiting is a serious worldwide issue that threatens human health and economic security. How to apply anti-counterfeiting techniques to textile materials remains a great challenge. Herein, we report bimetallic AuAg nanoclusters (NCs) synthesized by one-step reduction of chloroauric acid (HAuCl4) and silver nitrate (AgNO3) with wool keratin (WK) as reducer and silk fibroin (SF) as stabilizer. The strongest orange-red fluorescence under ultraviolet light as well as the highest zeta potential absolute values of -27.97 mV were simultaneously realized in the optimal proportion Au-AgNCs2 (WK/SF is 3/2), which was further processed to a series of anti-counterfeiting films by blending with SF, silk sericin (SS), and polyvinyl alcohol (PVA). After successfully being numbered into fifteen colors, a dark blue-orange-dark red-dark blue cyclic fluorescent anti-counterfeiting color chart was designed. In addition, a two-Maxwell-unit model was constructed to assist with the microstructure analysis, which found that the formation of hydrogen bonds and the secondary structure transition from α-helices to ß-sheets during stretching were responsible for improving the mechanical properties and the two-staged fracture curves of films, respectively. Finally, a patterned and multicolor fluorescence anti-counterfeiting fabric application was demonstrated by combining the color chart and screen printing, indicating the great potential in textile anti-counterfeiting.

Defining a timeline of colon pathologies after keratin 8 loss: rapid crypt elongation and diarrhea are followed by epithelial erosion and cell exfoliation.

Keratins are epithelial intermediate filament proteins that play a crucial role in cellular stress protection, with K8 being the most abundant in the colon. The intestinal epithelial-specific K8-deficient mouse model (K8flox/flox;Villin-Cre) exhibits characteristics of inflammatory bowel disease, including diarrhea, crypt erosion, hyperproliferation, and decreased barrier function. Nevertheless, the order in which these events occur and whether they are a direct cause of K8 loss or a consequence of one event inducing another remains unexplored. Increased knowledge about early events in the disruption of colon epithelial integrity would help to understand the early pathology of inflammatory and functional colon disorders and develop preclinical models and diagnostics of colonic diseases. Here, we aimed to characterize the order of physiological events after Krt8 loss by utilizing K8flox/flox;Villin-CreERt2 mice with tamoxifen-inducible Krt8 deletion in intestinal epithelial cells, and assess stool analysis as a noninvasive method to monitor real-time gene expression changes following Krt8 loss. K8 protein was significantly decreased within a day after induction, followed by its binding partners, K18 and K19 from day 4 onward. The sequential colonic K8 downregulation in adult mice leads to immediate diarrhea and crypt elongation with activation of proliferation signaling, followed by crypt loss and increased neutrophil activity within 6-8 days, highlighting impaired water balance and crypt elongation as the earliest colonic changes upon Krt8 loss. Furthermore, epithelial gene expression patterns were comparable between colon tissue and stool samples, demonstrating the feasibility of noninvasive monitoring of gut epithelia in preclinical research utilizing Cre-LoxP-based intestinal disease models.NEW & NOTEWORTHY Understanding the order in which physiological and molecular events occur helps to recognize the onset of diseases and improve their preclinical models. We utilized Cre-Lox-based inducible keratin 8 deletion in mouse intestinal epithelium to characterize the earliest events after keratin 8 loss leading to colitis. These include diarrhea and crypt elongation, followed by erosion and neutrophil activity. Our results also support noninvasive methodology for monitoring colon diseases in preclinical models.

Ovine KRTAP36-2: A New Keratin-Associated Protein Gene Related to Variation in Wool Yield.

Keratin-associated proteins (KAPs) are structural components of wool fibres. High-glycine/tyrosine (HGT)-KAPs are a subset of the KAP family, and their abundance in fibres varies. In this study, we report the discovery of an ovine HGT-KAP gene to which we assigned the name KRTAP36-2. Polymerase chain reaction and single-strand conformation polymorphism (PCR-SSCP) analyses revealed four variants of this gene in a screening population of 170 sheep from a variety of breeds. The DNA sequencing of the variants revealed four single-nucleotide polymorphisms (SNPs) and a dinucleotide deletion. Three of these SNPs were in the coding region, and one of these was non-synonymous and potentially led to the amino acid substitution p.Cys27Gly near the middle of the protein. The remaining SNP was located near the putative TATA box, and the di-nucleotide deletion was near the putative transcription initiation site. The effect of this variation in KRTAP36-2 was investigated in 274 Southdown × Merino lambs that were the progeny of five sires. Variation was only found to be associated with wool yield, that is, the proportion of the greasy fleece that remained as clean fleece upon scouring (expressed as a percentage). This may have some value in increasing wool production.

Fusion of Substrate-Binding Domains Enhances the Catalytic Capacity of Keratinases and Promotes Enzymatic Conversion of Feather Waste.

The unique role of keratinases in keratin hydrolysis has garnered huge interest in the recovery of feather waste. However, owing to the high hydrophobicity of feather keratins, the catalytic capacity of keratinases for hydrolyzing feathers is typically low. In this study, we aimed to improve the keratinase feather hydrolysis efficiency by fusing a substrate-binding domain into the enzyme. We screened several carbohydrate-binding modules (CBMs) and linking peptides. We selected the most promising candidates to construct, clone, and express a fusion keratinase enzyme KerZ1/CBM-L8 with a feather hydrolysis efficiency of 7.8 × 10-8 g/U. Compared with those of KerZ1, KerZ1/CBM-L8 has a feather hydrolysis efficiency that is 2.71 times higher, a kcat value that is 179% higher, which translates to higher catalytic efficiency, and Km and binding constant (K) values that are lower, which indicate a higher KerZ1/CBM-L8-keratin binding affinity. Moreover, the number of binding sites to the substrate (N), determined using isothermal titration calorimetry, was 24.1 times higher than that of KerZ1. Thus, the fusion of the substrate-binding domain improved the binding ability of the keratinase enzyme to the hydrophobic substrate, which improved its feather hydrolysis efficiency. Therefore, using the fusion keratinase would significantly improve the recovery of feather waste.

Feather keratin-montmorillonite nanocomposite hydrogel promotes bone regeneration by stimulating the osteogenic differentiation of endogenous stem cells.

Bone defects caused by bone trauma, infection, surgery, or other systemic diseases remain a severe challenge for the medical field. To address this clinical problem, different hydrogels were exploited to promote bone tissue regrowth and regeneration. Keratins are natural fibrous proteins found in wool, hair, horns, nails, and feather. Due to their unique characteristics of outstanding biocompatibility, great biodegradability, and hydrophilic, keratins have been widely applicated in different fields. In our study, the feather keratin-montmorillonite nanocomposite hydrogels that consist of keratin hydrogels serving as the scaffold support to accommodate endogenous stem cells and montmorillonite is synthesized. The introduction of montmorillonite greatly improves the osteogenic effect of the keratin hydrogels via bone morphogenetic protein 2 (BMP-2)/phosphorylated small mothers against decapentaplegic homolog 1/5/8 (p-SMAD 1/5/8)/runt-related transcription factor 2 (RUNX2) expression. Moreover, the incorporation of montmorillonite into hydrogels can improve the mechanical properties and bioactivity of the hydrogels. The morphology of feather keratin-montmorillonite nanocomposite hydrogels was shown by scanning electron microscopy (SEM) to have an interconnected porous structure. The incorporation of montmorillonite into the keratin hydrogels was confirmed by the energy dispersive spectrum (EDS). We prove that the feather keratin-montmorillonite nanocomposite hydrogels enhance the osteogenic differentiation of BMSCs. Furthermore, micro-CT and histological analysis of rat cranial bone defect demonstrated that feather keratin-montmorillonite nanocomposite hydrogels dramatically stimulated bone regeneration in vivo. Collectively, feather keratin-montmorillonite nanocomposite hydrogels can regulate BMP/SMAD signaling pathway to stimulate osteogenic differentiation of endogenous stem cells and promote bone defect healing, indicating their promising candidate in bone tissue engineering.

Molecular Mobility in Keratin-Rich Materials Monitored by Nuclear Magnetic Resonance: A Tool for the Evaluation of Structure-Giving Properties.

Keratins are structural proteins that are abundant in human skin, nails, and hair, where they provide mechanical strength. In the present study, we investigate the molecular mobilities and structures of three keratin-rich materials with clearly different mechanical properties: nails, stratum corneum (upper layer of epidermis), and keratinocytes (from lower layer of epidermis). We use solid-state NMR on natural-abundance 13C to characterize small changes in molecular dynamics in these biological materials with close to atomistic resolution. One strong advantage of this method is that it detects small fractions of mobile components in a molecularly complex material while it simultaneously gives information on the rigid components in the very same sample. The molecular mobility can be linked to mechanical material properties in different conditions, including hydration or exposure to osmolytes or organic solvents. Importantly, the study revealed that the response to both hydration and addition of urea is clearly different for the nail keratin compared to the stratum corneum keratin. The comparative examination of these materials may provide a better understanding of skin diseases originating from keratin malfunction and contributes to the design and development of new materials.

Assessment of the Efficacy of an LL-37-Encapsulated Keratin Hydrogel for the Treatment of Full-Thickness Wounds.

Wound healing remains a burdensome healthcare problem due to moisture loss and bacterial infection. Advanced hydrogel dressings can help to resolve these issues by assisting and accelerating regenerative processes such as cell migration and angiogenesis because of the similarities between their composition and structure with natural skin. In this study, we aimed to develop a keratin-based hydrogel dressing and investigate the impact of the delivery of LL-37 antimicrobial peptide using this hydrogel in treating full-thickness rat wounds. Therefore, oxidized (keratose) and reduced (kerateine) keratins were utilized to prepare 10% (w/v) hydrogels with different ratios of keratose and kerateine. The mechanical properties of these hydrogels with compressive modulus of 6-32 kPa and tan δ <1 render them suitable for wound healing applications. Also, sustained release of LL-37 from the keratin hydrogel was achieved, which can lead to superior wound healing. In vitro studies confirmed that LL-37 containing 25:75% of keratose/kerateine (L-KO25:KN75) would result in significant fibroblast proliferation (∼85% on day 7), adhesion (∼90 cells/HPF), and migration (73% scratch closure after 12 h and complete closure after 24 h). Also, L-KO25:KN75 is capable of eradicating both Gram-negative and Gram-positive bacteria after 18 h. According to in vivo assessment of L-KO25:KN75, wound closure at day 21 was >98% and microvessel density (>30 vessels/HPF at day 14) was significantly superior in comparison to other treatment groups. The mRNA expression of VEGF and IL-6 was also increased in the L-KO25:KN75-treated group and contributed to proper wound healing. Therefore, the LL-37-containing keratin hydrogel ameliorated wound closure, and also angiogenesis was enhanced as a result of LL-37 delivery. These results suggested that the L-KO25:KN75 hydrogel could be a sustainable substitute for skin tissue regeneration in medical applications.

Fine and high-performance protein fibers from meat goat hairs via manipulation of keratin alignment and crosslinkages.

We have converted waste coarse and short hairs of meat goats to high-value, fine, long, and elastic protein fibers via manipulation of keratin alignment and crosslinkages. The shortage of non-petroleum-based fibers has become one of the most prominent concerns. However, few technologies could convert such coarse hairs to fine and flexible fibers for textile uses due to limitations in extensions of fibers, less than 100% of their initial length, and poor flexibility retention of extended fibers, less than 20% of breaking elongation. Limited stretchability and flexibility retention of hair fibers mainly resulted from the difficulty in recovery of crosslinkages in stretched fibers. Here, we used a series of dithiols via multiple cycles of reduction, drawing, and oxidation to produce fine and flexible fibers from coarse and short wool for the first time. Dithiols with long backbones ensured sufficient crosslinkages in proteins after high ratios of drawings. Besides, long crosslinkages brought by dithiols secured sufficient movement between protein molecules and prevented of rupturing chains of protein molecules. As a result, short and coarse hairs of meat goats were turned into long and fine fibers, 350% of their original lengths and 54% of their original diameters, with excellent performance properties, with retentions of 170% of tenacity, and 50% of breaking elongation compared to original hairs. Also, a set of models developed to quantify the effects of extensions of fibers and structures of crosslinkers on the mechanical properties of fibers guides scientists and engineers on property improvement of materials via controlled crosslinkings.

Identification of biomarkers in diabetic nails by Raman spectroscopy.

BACKGROUND: The growth of Diabetes Mellitus (DM) is a serious public health issue which is more prevalent in developing countries. The main problems related to DM are the gradual changes in the structural and functional integrity of tissues caused by hyperglycemia, which calls for early diagnosis and periodic monitoring exams. Recent studies suggest that the quality of the nail plate has great potential to assess the secondary complications of DM. Hence, this study aimed to determine the biochemical characteristics of the nails of individuals with DM2 by Raman confocal spectroscopy (CRS). METHODS: We collected fragments from the distal region of the fingernails of 30 healthy volunteers and 30 volunteers with DM2. The samples were analyzed by CRS (Xplora - Horiba) coupled to a 785 nm laser. RESULTS: Alterations in different biochemical components, such as proteins, lipids, amino acids, and final agents of advanced glycation, and alterations in the disulfide bridges, which are important in stabilizing keratin in nails were identified. CONCLUSION: The spectral signatures and new DM2 markers in nails were identified. Therefore, the possibility of acquiring biochemical information by evaluating the nails of diabetics, a simple and easily acquired material associated with the CRS technique, may allow health complications to be detected quickly.

Chemically cross-linked keratin and nanochitosan based sorbents for heavy metals remediation.

Biosorbents for water remediation were prepared using keratin biopolymer cross-linked with nanochitosan (NC). Keratin proteins were dissolved using reducing agents and NC was incorporated with concentrations of 1, 3 and 5 % individually into the keratin solution. The mixtures were thermally treated at 75°C overnight, which promoted the formation of ester bonds between the hydroxyl groups of nanochitosan and the carboxylic groups of the keratin biopolymer. The resulting keratin derived biosorbents were characterized by X-Ray photoelectron spectroscopy, confirming the cross-linking between keratin and nanochitosan. The chicken feathers keratin (CFK) surface modifications with nanochitosan were examined with Brunauer-Emmett-Teller, scanning and transmission electron microscopies. The sorption capacity of biosorbents was tested for eight different metals simultaneously at different contact times (15, 30, 60, 120, 240, 280 mins) and pH (5.5, 7.5 and 8.5), including arsenic, selenium, chromium, nickel, cobalt, lead, cadmium and zinc, using simulated industrial wastewater water containing 600 µgl-1 concentration of each metal. The synthesized environmentally benign biosorbents exhibited biosorption of metals upto 98 % at pH 7.5 and a contact time of 24 h, showing their potential for industrial wastewater remediation.

Insights of keratin geometry from agro-industrial wastes: A comparative computational and experimental assessment.

Understanding the structural properties of keratin is of great importance to managing their potential application in keratin-inspired biomaterials and its management of wastes. In this work, the molecular structure of chicken feather keratin 1 was characterized by AlphaFold2 and quantum chemistry calculation. The predicted IR spectrum of the N-terminal region of feather keratin 1, consisting of 28 amino acid residues, was used to assign the Raman frequencies of the extracted keratin. The MW of experimental samples were 6 & 1 kDa while the predicted MW (∼10 kDa) of ß-keratin. Experimental analysis shows the magnetic field treatment could affect the functional and surface structural properties of keratin. The particle size distribution curve illustrates the dispersion of particle size concentration, while TEM analysis demonstrates the reduction of particle diameter to 23.71 ± 1.1 nm following treatment. High-resolution XPS analysis confirmed the displacement of molecular elements from their orbital.

Using Wool Keratin as a Structural Biomaterial and Natural Mediator to Fabricate Biocompatible and Robust Bioelectronic Platforms.

The design and fabrication of biopolymer-incorporated flexible electronics have attracted immense interest in healthcare systems, degradable implants, and electronic skin. However, the application of these soft bioelectronic devices is often hampered by their intrinsic drawbacks, such as poor stability, inferior scalability, and unsatisfactory durability. Herein, for the first time, using wool keratin (WK) as a structural biomaterial and natural mediator to fabricate soft bioelectronics is presented. Both theoretical and experimental studies reveal that the unique features of WK can endow carbon nanotubes (CNTs) with excellent water dispersibility, stability, and biocompatibility. Therefore, well-dispersed and electroconductive bio-inks can be prepared via a straightforward mixing process of WK and CNTs. The as-obtained WK/CNTs inks can be directly exploited to design versatile and high-performance bioelectronics, such as flexible circuits and electrocardiogram electrodes. More impressively, WK can also be a natural mediator to connect CNTs and polyacrylamide chains to fabricate a strain sensor with enhanced mechanical and electrical properties. With conformable and soft architectures, these WK-derived sensing units can be further assembled into an integrated glove for real-time gesture recognition and dexterous robot manipulations, suggesting the great potential of the WK/CNT composites for wearable artificial intelligence.

Effect of ultrasound on keratin valorization from chicken feather waste: Process optimization and keratin characterization.

Chicken feather (CF) has been deemed as one of the main poultry byproducts with a large amount produced globally. However, the robust chemical nature of chicken feathers has been limiting in its wide-scale utilization and valorization. The study proposed a strategy of keratin regeneration from chicken feather combining ultrasound and Cysteine (Cys)-reduction for keratin regeneration. First, the ultrasonic effect on feather degradation and keratin properties was systematically explored based on Cys-reduction. Results showed that the feather dissolution was significantly improved by increasing both ultrasonic time and power, and the former had a greater impact on keratin yield. However, the treatment time over 4 h led to a decrease of keratin yield, producing more soluble peptides, > 9.7 % of which were < 0.5 kDa. Meanwhile, prolonging time decreased the thermal stability with weight loss at a lower temperature and amino acids content (e.g., Ser, Pro and Gly) of keratin. Conversely, no remarkable damage in chemical structure and thermal stability of regenerated keratin was observed by only increasing ultrasonic power, while the keratin solubility was notably promoted and reached 745.72 mg·g-1 in NaOH (0.1 M) solution (400 W, 4 h). The regenerated keratin under optimal conditions (130 W, 2.7 h, and 15 % of Cys) possessed better solubility while without obvious damage in chemical structure, thermal stability, and amino acids composition. The study illustrated that ultrasound physically improved CF degradation and keratin solubility without nature damage and provided an alternative for keratin regeneration involving no toxic reagent, probably holding promise in the utilization and valorization of feather waste.

The fabrication and evaluation of silver nanoparticle-based keratin scaffolds.

The biotoxicity caused by focus releasing of Ag, which associated with the Ag loading mode, is a problematic issue that need to be solved for practical utilization of the keratin based wound dressing. In this study, keratin/AgNPs blend scaffolds (Ker/Ag) and keratin scaffolds with AgNPs attached on the scaffold's wall surface (Ag@Ker) were prepared. Structure and physical properties of the scaffolds were tested and investigated. In comparison to the Ag@Ker scaffolds, the Ker/Ag scaffolds with uniform dispersion of AgNPs have larger tensile strength and slower degradation rate. Both kind of scaffolds present excellent antibacterial property with 10 µg mL-1 AgNPs addition, while the Ker/Ag displayed a linear Ag releasing ratio in the first 5-7 days, which is beneficial for obtaining a continuous antibacterial property and avoiding the biotoxicity caused by focus release of Ag. Correspondingly, cytotoxicity assay further reveals that the continuously slow release of Ag of the Ker/Ag scaffolds accelerated the proliferation of cell. Infectious animal models and histological studies showed that the Ker/Ag scaffolds can effectively inhibit the inflammatory response and accelerate epithelialization. Thus, it can be concluded that the Ker/Ag scaffolds with uniform dispersion of AgNPs are more attractive as wound repair materials.

Wool keratin as a novel alternative protein: A comprehensive review of extraction, purification, nutrition, safety, and food applications.

The growing global population and lifestyle changes have increased the demand for specialized diets that require protein and other essential nutrients for humans. Recent technological advances have enabled the use of food bioresources treated as waste as additional sources of alternative proteins. Sheep wool is an inexpensive and readily available bioresource containing 95%-98% protein, making it an outstanding potential source of protein for food and biotechnological applications. The strong structure of wool and its indigestibility are the main hurdles to achieving its potential as an edible protein. Although various methods have been investigated for the hydrolysis of wool into keratin, only a few of these, such as sulfitolysis, oxidation, and enzymatic processes, have the potential to generate edible keratin. In vitro and in vivo cytotoxicity studies reported no cytotoxicity effects of extracted keratin, suggesting its potential for use as a high-value protein ingredient that supports normal body functions. Keratin has a high cysteine content that can support healthy epithelia, glutathione synthesis, antioxidant functions, and skeletal muscle functions. With the recent spike in new keratin extraction methods, extensive long-term investigations that examine prolonged exposure of keratin generated from these techniques in animal and human subjects are required to ascertain its safety. Food applications of wool could improve the ecological footprint of sheep farming and unlock the potential of a sustainable protein source that meets demands for ethical production of animal protein.